In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the home, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure that the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you are done, so you don’t wind up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Make certain it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the face of your dog. Do not make the folds too large or else it might look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Make certain that the ears are flat and be sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask because your pet http://waxspa.aws3.net/the-best-affordable-dog-food-finding-the-perfect-type-of-inexpensive-dog-food/ security, you will need to do some sanding to be certain it is safe on your dog. You can do this by sanding off any excess paper that may have been removed from your mask.

 
 
 
Scroll Up
STILL NOT SURE WHAT TO DO?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

Form is temporarily not available. Please visit our contact page.
X
CONTACT DIVINE